Innovative Solutions in Time and Frequency Synchronisation.
Meinberg USA Meinberg Homepage | RSS Feed | Contact Form

LANTIME M600/GPS/PTPv2 :
PTPv2/IEEE 1588-2008 Grandmaster Clock and NTP Time Server with integrated GPS radio clock

MEINBERG has announced a cooperative design effort with a Swiss Institute in order to add PTP (Precise Time Protocol) support to the LANTIME series of time servers.

PTP (IEEE 1588) is a protocol for network time synchronization, just like NTP but with dramatically improved accuracy (sub-microsecond compared to sub-millisecond). It is suitable for small and well-designed networks in industrial environments, e.g. process automation or data logging.

...Now with 3 year warranty...

PTP pushes the envelope - 10 nanosecond synchronization via NTP is here !

The Meinberg LANTIME time server is used around the world to provide accurate time to networks of any size. It synchronizes all PTPv2 / IEEE 1588-2008 compatible clients and systems either NTP- or SNTP-compatible and uses a built-in Meinberg GPS radio clock as its reference time source. A highly stable and precise oscillator is capable of bridging interferences or a temporary loss of reception. The standard M600 model already offers a broad range of interfaces and can be customized to meet the special requirements of your application.

A large VF display shows the state of the internal GPS receiver and the NTP subsystem. Three LEDs (green/red) indicate the status of the three main components: Reference Time (GPS), Time Synchronization Service (NTP) and Network (Link status). A fourth red LED is labelled ALARM and can be configured to signal any event that is covered by the notification handling routines.


LANTIME M600 GPS Front-View

  • 1.   Mounting wholes for 19 inch cabinet
  • 2.   VF - Display luminescent, 4 x 32 chars
  • 3.   F1 button: show help and additional informations
  • 4.   F2 button: overview of network parameters
  • 5.   4 arrow buttons: select next menu and change value of parameters
  • 6.   OK button: save changes or enter submenu
  • 7.   ESC button: cancel menu and one level up
  • 8.   Status LED Referenz time: green: synchronized red: error
          Status LED NTP time service: green: synchronized red: error
          Status LED Network connection: green: Link red: error
          Status LED Alarm: red: error
  • 9.   Terminal connector, serial interface, Vt100, 38400Baud,8N1, Nullmodem to PC
  • 10. USB connector for USB Stick


LANTIME M600/GPS/PTPv2 Back-View

  • 1.   4 Networkconnectors- ETH0, ETH1, ETH2, ETH3, 10/100 Mbit RJ45
  • 2.   1 Networkconnector- ETH4 and 1 Network connector PTP0/IEEE1588 - RJ45 10/100 Mbit
  • 3.   Timecode - output unmodulated
  • 4.   Timecode - output modulated
  • 5.   Frequency Synthesizer output
  • 6.   Pulse per minute output
  • 7.   Puls Per Second output
  • 8.   10MHz output
  • 9.   GPS antenna BNC
  • 10. GPS Time Sync Error Relais output
  • 11. RS232 output serial interface timecode
  • 12. Power supply, 85 ... 264 V AC, 47... 63 Hz, 1 A/230 V , 2 A/115 V
Because of its modular system architecture it is possible to equip a LANTIME time server with a number of different reference time sources. Optionally several additional frequency-, serial string- and pulse outputs are available and by combining two (even different) time sources and redundant power supplies, high-availability systems are no problem. The LANTIME M600/GPS/PTP is equipped with high precision oscillator "OCXO HQ" (look at oscillator options for details) as standard. The oscillator determines the holdover characteristics (e.g. when the GPS signal is disturbed or jammed). The oscillator option "OCXO DHQ" is available to fulfill higher requirements.
For more information visit the PTP Time Server MEINBERG Page!


Downloads from Meinberg Homepage

Download Info SheetDownload Info Sheet: info_lantime-m600-gps-ptpv2.pdf
Download ManualDownload Manual: info_lantime-m600-gps-ptpv2.pdf

Meinberg-USA Download PageFor Software Downloads visit our Download Page


Interested in LANTIME M600/GPS/PTPv2 : PTPv2/IEEE 1588-2008 Grandmaster Clock and NTP Time Server with integrated GPS radio clock ?

Please fill in the Form - we send detailed informations to you immediately!

Your Name
Company Name
Your E-Mail Address *
Telephone
Address
City/Zip Code
State *
Your Message
Fields marked with * are mandatory!