The ANZ14 V4 is a stand-alone radio clock with integrated DCF77 receiver and power supply. The 14-digit LED display shows time, date and day-of-week. The display brightness is variable. A serial time string is generated either once per second, once per minute, on request only or never. Baudrate, framing and time zone can be configured separately by menu and two front panel buttons. It is also possible to use the ANZ14 V4 as a display for a preconnected clock. In this case the partially equipped version without DCF77 receiver is sufficient.

LF Receiver
An external ferrit antenna is used to receive the signal from DCF77 and supplies it to the on-board LF receiver where it is demodulated by a straight detector with automatic gain control. The demodulated time marks are fed to the clock´s microprocessor.

Buffered Real Time Clock
In case of supply voltage failure the on-board real time clock keeps the time powered by a backup capacitor for more than 150 hours. This capacitor does not need any maintenance and ensures that the ANZ14 returns with the actual time information even before the first synchronisation. Alternatively, the clock can be ordered with a lithium battery which has a live time of at least 10 years guaranteed.

Option: can act as a slave clock for Meinberg LANTIME NTP Time Server (ANZ14/NET). RS232/20mA-interface, unlimited series connection possible, with buffered hardware clock and integrated power supply unit.

NEW: Configuration with two push buttons and setup menu.

• 12 numeric LED digits for time and date
• 2 alphanumeric LED digits for day of the week
• 14mm/13mm character height (time/date), variable brightness
• Modulation indicated by LEDs
• Setup menu for configuration

Downloads from Meinberg Homepage

Download Info Sheet: info_anz14.pdf
Download Manual: info_anz14.pdf

For Software Downloads visit our Download Page