GPS170SV:
GPS Satellite Receiver (Eurocard)

Key Features:

• Pulses per second and per minute
• 2 time trigger inputs
• 2 RS232 interfaces
• Optional DDS frequency synthesizer
• DCF77-simulation
• Antenna connected with up to 300m of standard coaxial cable RG58
• Standard frequency outputs
• Optional up to 4 serial ports
• 3 programmable switching outputs
• Timecode generator (IRIG-B, AFNOR)
• Including GPS antenna, 20m standard cable and manual on USB key
• Option: GPS antenna input via BNC connector in front panel

The frequency locking of the master oscillator to the GPS-system enables the module GPS170SV to generate fixed and optionally programmable standard frequencies with high accuracy and stability. Various oscillator options allow the cost efficient implementation of different requirements concerning the accurracy of the outputs.

The pulse generator of GPS170SV generates pulses per second and per minute. As an option three programmable outputs are available. The pulses are synchronized to UTC-second. Up to four serial interfaces are available for sending timestrings. These ASCII-telegrams include information regarding time, date and status of the GPS-receiver.

The module provides two inputs for measurement of asynchronous time events. These capture events can be read via a serial interface.

The parameter setting of the module is done by a GPS monitoring software (GPSMON).

• 8HP/3U (40mm x 128mm)
• Option: 4HP/3U (20mm x 128mm)