Translates the signal of the GPS system to an intermediate frequency
The GPSAV4 distributes the signal of a Meinberg GPS antenna/converter unit to up to four Meinberg GPS receivers.
Data Sheet
Meinberg Product Page
Last Update: 2024-04-23
© 2003 - 2024,
GPS180:
GPS Satellite Receiver with LC-Display
Key Features:
- 12 channel GPS C/A-code receiver
- 2x RS-232 interfaces
- 2x time trigger inputs
- Alarm output
- Antenna connected with up to 300 m of standard coaxial cable RG58
- Optional up to 4 serial ports
3 programmable switching outputs
timecode generator (IRIG-B, AFNOR)
5 MHz Frequency Output - Optional expansions/configurations available
- Including GPS antenna, 20 m standard cable and manual on USB storage device
NEW: The first choice for a broad range of applications,
including time and frequency synchronization tasks
The module GPS180 generate fixed and programmable standard frequencies with very high accuracy and stability.
The pulse generator of GPS180 generates pulses per second and per minute. Optional three programmable outputs are available.
The front panel integrates a LC-Display that shows information regarding the GPS receiver in different menus. In combination with four push buttons it is also used to setup all configurable parameters.
Up to four serial interfaces are available for sending time strings. These ASCII telegrams include information regarding time, date and status of the GPS receiver. The module provides two inputs for measurement of asynchronous time events. These capture events are shown on the LC display and can be read via a serial interface.
