{CC-CANVASCONTENT}

ONT4xx / ONT6xx:
Large NTP LED Display

NTP Display with 100mm LED numerals and Power over Ethernet in a high quality metal housing

Key Features:

  • 4 or 6 Digit red LED Display (HH:MM or HH:MM:SS)
  • large 100mm numerals, visible from over 50 m (150’)
  • High Quality Stainless Steel or Aluminium Housing
  • Power over Ethernet (PoE), no Power Supply needed
  • DHCP or static IP addressing
  • Telnet configuration
  • 12h/24h Time option

These displays are an excellent accessory to all Meinberg LANTIME Time Servers

With Power over Ethernet (PoE) you can connect a time display simply by plugging directly into an Ethernet jack on your local area network; no AC power outlet or power cord is required! Installation is quick and inexpensive and displays can be relocated easily. Time data is automatically updated over the network, and no specialized software is required. You can control one or hundreds of displays with a simple telnet session. These devices make practical use of PoE standards to eliminate electrical wiring and keep installation as simple as possible.

Note: The local area network must support IEEE 802.3af Power over Ethernet in order for the PoE displays to operate. If the network is not currently PoE-enabled and is going to support a PoE digital clock, a Single Port Midspan Power Injector must be added to the 10/100 BaseT LAN.

ONT4 Models   ONT6 Models
Display Face 4-Digit, Red 7-segment LEDs   Display Face 6-Digit, Red 7-segment LEDs
Dimensions 12”L X 6”H X 2.2”D (30 cm X 5.6 cm)   Dimensions 17.5”L X 6”H X 2.2”D (44.5 cm X 5.6 cm)
Cabinets Plastic in Black, Putty, or Off-White, Brushed Stainless Steel   Cabinets Aluminum in Black, Putty, or Off-White, Brushed Stainless Steel
Weight Plastic Cabinet: 2 lbs (0.9kg)   Steel Cabinet: 3.8 lbs (1.7kg)
Weight Aluminum Cabinet 2.5 lbs (1.1 kg)   Steel Cabinet 5 lbs ( 2.3 kg)