MTM Road Show 2015
Last Update: 2015-11-23
© 2003 - 2015, JTime!, Inc.

JTime! ® is a registered trademark


If you would like to receive the Meinberg Newsletter with technical news, driver update or other update information, please visit Meinberg News Page!

Latest MEINBERG Blog Posts -

Fri, 01 May 2015Saving electrical power in railway grids By Andreja Jarc. The production and demand of electrical power must be the same at all times for stability and optimal operation of railway power grids. If there is too much power it will [...] Wed, 25 Feb 2015Leap Second Test By Andreja Jarc. The timing industry is anxiously waiting for the unavoidable Leap Second Insertion which is announced for this year on June 30, 2015 at UTC midnight. The Leap Second has been [...] Wed, 11 Feb 2015NTP Monitoring By Andreja Jarc. Introduction Meinberg LANTIME servers with a fw 6.17.004 or higher are enhanced with a new NTP monitoring feature. This feature enables monitoring of NTP performance of up to 100 [...] Fri, 29 Aug 2014Time Synchronization Requirement for Synchrophasers Five Minute Facts About Packet Timing By Doug Arnold. The IEEE Standard for Synchrophaser Measurements for Power Systems (IEEE C37.118.1 -2011) recommends that phase measurement equipment in power [...] Fri, 15 Aug 2014Hands-on tutorial on PTPv2 By Andreja Jarc. At this time I will grant you a short summer break from all the theory and we will do some hands-on refreshment instead! Let’s check if PTP messages between a GM (Grandmaster) [...] Mon, 21 Jul 2014PTPv2 Configuration over a Web Interface By Andreja Jarc. In my last post I promised to show you how to configure the IEEE 1588 Default Profile on a grandmaster (GM) via a web interface. This is what we will do right now. We will use the [...]