GPS/MP:
The ready-to-operate GPS Systems in Rackmount Slimline Modular Case

Key Features:

• 2x time trigger inputs
• Pulses per second and per minute
• LC Display for configuration ( .../LCD/... types only)
• 2x RS-232 interfaces
• Integrated power supply (100 ... 240 V AC / V DC)
• Optional (only .../F4/... models):
• Four frequency outputs
• 2.048 MHz direct, 3.0 Vpp into 50 Ohm
• 2.048 MHz switched, 3.0 Vpp into 25 Ohm
• 10 MHz direct, 3.0 Vpp into 50 Ohm
• 10 MHz switched, 3.0 Vpp into 25 Ohm
• Alarm relay output, changeover contact
• Including GPS antenna, 20m standard cable and manual on USB key

The ready-to-operate systems GPS-MQ/F4/MP (GPS-MQ/LCD/F4/MP) and GPS/MP (GPS/LCD/MP) are built up in 19" slimline modular cases (1U).

The frequency locking of the master oscillator to the GPS system enables the GPS module to generate fixed and programmable standard frequencies with high accuracy and stability. Various oscillator options allow the cost efficient implementation of different requirements concerning the accurracy of the outputs. The pulse generator of GPS/MP generates pulses per second and per minute. As an option three programmable outputs are available. The pulses are synchronized to UTC second.

Up to four serial interfaces are available for sending time strings. These ASCII telegrams include information regarding time, date and status of the GPS receiver. The module provides two inputs for measurement of asynchronous time events. These capture events are shown on the LC display (only LCD models) and can be read via a serial interface.

The front panel of LCD models integrates a LC display that shows information regarding the GPS receiver in different menus. In combination with four push buttons it is also used to setup all configurable parameters.

The ../F4/.. models come with E1/T1 frequency outputs and are widely used in the telecommunicaton sector.

A powerful and feature-rich software called GPSMON is available for configuration and monitoring of your Meinberg GPS receivers.